EVIBOND is a next-generation advertising surface for wide-format printing. A three-layer co-extruded PVC board: rigid virgin PVC outer layers bonded with a lightweight engineered core in a single co-extrusion operation (rigid virgin PVC top, lightweight engineered core, stabilising rigid layer below). Up to 50% lighter than standard PVC foam board with 1.5× better flatness. Format 122×244 cm, 5 mm in 20-sheet boxes, 10 mm in 10-sheet boxes. EVIBOND is part of EVI DIGITAL.

EVIBOND® — PVC Foam Board, Expanded PVC for Advertising

— Designed in GB · Since 1996

The perfect advertising surface.

Technology Request a sample

EVIBOND® three-layer co-extruded PVC boards — 5 mm and 10 mm sheets with co-extruded foamed core visible at the edge

Format122 × 244 cm

Thicknesses5 · 10 mm

PrintUV LED Flatbed · Latex Flatbed · Self-adhesive vinyl

CategoryEVI DIGITAL · Manufacturer

— Technology

Not a substrate. An advertising surface.

EVIBOND® is a PVC foam board built for advertising — a three-layer co-extruded expanded PVC sheet for wide-format UV LED and Latex flatbed printing. Manufactured directly by EVI DIGITAL, available in 122×244 cm format, 5 mm and 10 mm thickness, for sign-makers and print shops working with plastic materials for signage.

Results are measurable. EVIBOND is up to 50% lighter than standard PVC foam board at the same thickness — through a calibrated core density rather than thinner surfaces. It holds flatness 1.5× better: the sheet does not sag under its own weight and stays stable across temperature swings. This is not a substrate for print — it is a finished advertising plastic with Shore D 55 hardness, water absorption < 1% and reference whiteness for UV LED and Latex flatbed printing.

Each batch is verified with a print test on the EU-1000MF UV LED Large Format Flatbed — an industrial flatbed for rigid substrates. EVIBOND® is supplied PVC sheets wholesale through a regional distributor network and direct from the EVI DIGITAL factory.

−50%Weight vs. standard
×1.5Better flatness
Shore D 55Surface hardness
< 1%Water absorption

Batch-controlled virgin PVC resin — pure, reference-white powder used as the raw material for the printable skin of EVIBOND® boards — Batch-controlled virgin PVC resin · the starting material.

EVIBOND® production line — automated co-extrusion of three-layer rigid PVC boards in the 17,000 m² ISO 9001 / ISO 14001 facility — Co-extrusion line · 17,000 m² · ISO 9001 + ISO 14001 facility.

— Material structure

Three layers. One process.

EVIBOND is a three-layer co-extruded PVC board. Two rigid virgin PVC outer layers and a lightweight engineered core — all bonded in a single co-extrusion operation. No glue, no separate bonding step, no risk of delamination: three layers acting as one.

EVIBOND® three-layer structure — rigid virgin PVC top skin (printable), lightweight foamed engineered core, rigid virgin PVC bottom skin, co-extruded in a single pass without glue — Three layers. One co-extrusion. Two rigid PVC skins around a lightweight engineered foam core — bonded molecularly, no adhesive, no delamination.

Download technical presentation

— Specifications

Simple table. Clear numbers.

EVIBOND® Triple-Layer PVC Foam Board — technical specifications.
Parameter	EVIBOND 5 mm	EVIBOND 10 mm
Thickness	5 mm	10 mm
Sheet format	122 × 244 cm	122 × 244 cm
Sheets per box	20	10
Structure	Three-layer co-extruded PVC	Three-layer co-extruded PVC
Density	~250 kg/m³	~250 kg/m³
Surface hardness	Shore D 55	Shore D 55
Water absorption (24h)	< 1%	< 1%
Service temperature	up to 55°C	up to 55°C
Thermal expansion	0.07 mm/m·K	0.07 mm/m·K
Fire classification	C-s3, d0	B-s2, d0
Weight vs standard	−50%	−50%
Print	UV LED · Latex flatbed	UV LED · Latex flatbed
Self-adhesive vinyl	Eco-solvent · Solvent	Eco-solvent · Solvent
Processing	Knife · CNC · Laser · Saw	Knife · CNC · Laser · Saw

— Applications

Where the image matters.

Indoor signage

Wayfinding, directional panels, totems for malls, hotels, offices.

POS / POP displays

Point-of-sale stands, seasonal window displays, shelf-edge branding.

Mount board

Ideal substrate for posters, photography and gallery work.

Outdoor advertising

Street advertising and external displays. Water absorption below 1%, service temp up to 55°C.

Exhibition stands

Stand walls and lightweight modules for trade fairs, conferences and events.

3D logos & lettering

Laser-cut top layer, dimensional lettering and brand elements.

Kitchen & bathroom

Kitchen cabinet fronts, bathroom panels. 100% waterproof, Shore D 55 surface.

Décor & cladding

Decorative panels, wall cladding, interior design elements.

Furniture & partitions

Lightweight partitions, façade elements, exhibition and temporary furniture.

EVI DIGITAL® CNC router cutting an EVIBOND® PVC board — clean edges, no chipping, no delamination thanks to the co-extruded three-layer structure — EVIBOND® on a CNC router · clean edges, no chipping, no delamination — knife, CNC, CO₂ laser, water jet and standard saws all work.

— Recommended printers

We recommend printing on Roland.

EVIBOND® is a finished advertising surface — not a generic substrate. Every batch is verified with a print test, and the surface is engineered for direct UV LED and Latex flatbed printing as well as eco-solvent and solvent vinyl lamination. Below — three Roland flatbed UV printers we recommend for production.

Roland · Industrial flatbed UV

EU-1000MF UV

Industrial power. Flawless UV printing.

Roland's industrial-scale UV LED Large Format Flatbed for rigid substrates. Every EVIBOND® batch is print-tested on the EU-1000MF UV before shipment — surface whiteness, ink adhesion and flatness are verified to spec.

Roland · Direct-to-object

LO-640

Direct to object. Limitless creativity.

The wider VersaOBJECT LO-640 flatbed UV printer for production teams that print directly on rigid sheets and 3D objects. Recommended for high-volume signage, POS and direct-to-object EVIBOND® work.

Roland · Compact flatbed

LO-300

Compact precision. Professional results.

The compact VersaOBJECT LO-300 flatbed UV printer for studios, design shops and small production rooms. Ideal entry point for high-quality EVIBOND® POS, signage and prototypes.

Download EVIBOND® presentation

EVI® VI-500.002 cyanoacrylate instant adhesive — 20 g professional needle-tip bottle with full safety label, four bottle views and label artwork

— EVI® Adhesives

Adhesives built for production.

A new product line within EVI HOLDING: professional industrial adhesives for the same fabricators who already run EVIBOND® and EVI DIGITAL printable media — sign-makers, PVC window and door fabricators, stretch-ceiling installers.

Flagship: EVI® VI-500.002 · Cyanoacrylate · 20 g

Sign-making & POS production

3D letters, channel-letter returns, lightbox edges, POP and POS assembly. Bonds rigid PVC (including EVIBOND offcuts), ABS, acrylic, polystyrene and most metals in seconds.
PVC window & door fabricators

Gasket spot-fixing, sash-stop and bumper assembly, escutcheon and rosette bonding. The 20 g precision needle tip places exactly the right drop — no drips, no waste, no clean-up.
Stretch-ceiling installers

Corner and joint reinforcement, decorative profile fixing, harpoon-end spot-bonding. Reliable on PVC profiles and the harpoon edge of the canvas itself.

The EVI® Adhesives range is being expanded — neutral PVC profile bonders, harpoon adhesives, fast-cure structural assembly products. Distributed through the same EVI DIGITAL regional network. Contact us for product sheets and trade terms.

Detecting region…

— Regional network

Closer to you.

EVIBOND ships through direct regional partners. Short supply legs and on-the-ground warehouses — material doesn't travel halfway across the continent.

GB · United Kingdom

IMPERIAL ALLIANCE

Regional representative

British partner of EVI DIGITAL for the United Kingdom and Ireland. Supply coordination, marketing and technical support.

ADDRESS167-169 Great Portland Street, London W1W 5PF

PHONE+44 203 608 8180

RO · Romania

PAINTPOINT SRL

Official representative · since 2017

Locul 1 în Top Afaceri România in its category in recent years. Own warehouse infrastructure, deliveries across Romania and beyond.

ADDRESSjud. Mureș, Tîrgu Mureș, str. Gh. Doja 80, 540233

PHONE+40 767 077 779

WEBpaintpoint.ro

MD · Moldova

ICS WHITE CAPITAL SRL

Exclusive distributor · since 2020

Resident of TRACOM Industrial Park, Chișinău. 5,000 m² regional warehouse. Also the official Roland distributor in Moldova — closing the loop: EVIBOND material and the printers it is verified on are available through the same partner.

Official Roland distributor in Moldova

ADDRESSChișinău, Columna 170

PHONE+373 22 00 00 09

WEBwhitecapital.md

GE · Georgia

Georgia representative

Regional partner

EVI DIGITAL partner for Georgia and the South Caucasus. Supply, distributor support and end-customer service.

ADDRESSTbilisi, 17 K. Gogiashvili St., 0131

PHONE+995 32 222 7799

WEBadtec.ge

Full product specification

Frequently asked questions.

What is EVIBOND?

EVIBOND is a next-generation advertising surface for wide-format printing. A three-layer co-extruded PVC board: rigid virgin PVC outer layers bonded with a lightweight engineered core in a single co-extrusion operation.

Up to 50% lighter than standard PVC foam board with 1.5× better flatness. Format 122 × 244 cm, 5 mm in 20-sheet boxes, 10 mm in 10-sheet boxes.

EVIBOND is part of EVI DIGITAL.

How is EVIBOND better than standard PVC foam board?

Three concrete advantages: weight, flatness and surface.

EVIBOND is up to 50% lighter at the same thickness through a calibrated core density (~250 kg/m³). Easier to handle, lower load on fixings.

It holds flatness 1.5× better — the sheet does not sag under its own weight and stays stable across temperature changes up to 55°C.

Virgin PVC surface delivers Shore D 55 hardness, water absorption below 1% over 24 hours, optimised for UV LED and Latex ink adhesion.

What is the structure of EVIBOND?

EVIBOND is a three-layer co-extruded PVC board: three layers of rigid PVC bonded by co-extrusion in one continuous operation. No glue, no adhesive bonding, no delamination risk.

Top layer is printable rigid virgin PVC with reference whiteness. Core is engineered PVC, may include recycled material. Bottom layer is stabilising, symmetric to the top.

Co-extruded bonding gives three benefits: even geometry, no risk of delamination, and a uniform material at the cut edge.

Which printers is EVIBOND tested with?

EVIBOND batches are quality-controlled with print tests on the EU-1000MF UV LED Large Format Flatbed — an industrial flatbed for rigid substrates.

This confirms the declared surface characteristics before each shipment.

What sizes and packaging does EVIBOND come in?

EVIBOND ships in standard 122 × 244 cm (4 × 8 ft) format.

Two thicknesses available:

5 mm — boxes of 20 sheets. Indoor signage, POS, poster mounting.
10 mm — boxes of 10 sheets. Stands, furniture, 3D builds, outdoor.

Can EVIBOND be used outdoors?

Yes. Virgin PVC outer layers + co-extruded bond deliver 100% waterproofing: water absorption below 1% over 24 hours.

Service temperature up to 55°C, thermal expansion 0.07 mm/m·K — the sheet stays stable across outdoor temperature swings.

Fire classification: B-s2, d0 for 10 mm and C-s3, d0 for 5 mm.

Can EVIBOND be printed with a solvent printer?

Direct solvent printing on EVIBOND is impractical — flatbed solvent printers are virtually unavailable.

The classic workflow is: print the design on EVI DIGITAL self-adhesive vinyl and laminate it onto EVIBOND. The EVIBOND surface is compatible with both eco-solvent and solvent vinyl films.

Is EVIBOND suitable for furniture and bathrooms?

Yes. The Shore D 55 virgin PVC surface resists scratching and absorbs less than 1% water, making EVIBOND suitable for:

— kitchen cabinet fronts
— bathroom panels
— decorative panels and wall cladding
— lightweight partitions and temporary furniture

How is EVIBOND processed?

EVIBOND can be cut with a utility knife, CNC router, CO2 laser, water jet, and standard wood/plastic saws (circular, band, jigsaw).

Thanks to the co-extruded structure edges stay clean, without chipping or delamination. The surface can be painted, lacquered, and laminated with self-adhesive films.

Where can I buy EVIBOND in the UK, Romania, Moldova or Georgia?

EVIBOND has direct regional partners:

United Kingdom — IMPERIAL ALLIANCE (167-169 Great Portland Street, London W1W 5PF). +44 203 608 8180

Romania — PAINTPOINT SRL (Tîrgu Mureș, str. Gh. Doja 80). Locul 1 în Top Afaceri România in its category. paintpoint.ro · +40 767 077 779

Moldova — ICS WHITE CAPITAL SRL (Chișinău, Columna 170). Also the official Roland distributor in Moldova. whitecapital.md · +373 22 00 00 09

Georgia — Tbilisi, 17 K. Gogiashvili St., 0131. adtec.ge · +995 32 222 7799

Where is EVIBOND manufactured?

EVIBOND is produced in a 17,000 m² automated facility in Asia, certified to ISO 9001 and ISO 14001 standards.

The core may include recycled PVC, reducing raw-material consumption and transport impact while preserving surface quality.

The brand is part of EVI DIGITAL — a structure with a regional partner network across the United Kingdom, Romania, Moldova and Georgia.

Does EVI also make adhesives?

Yes. EVI® Adhesives is a complementary product line within EVI HOLDING — professional bonding products developed for the same fabricators who already use EVIBOND® and EVI DIGITAL printable media.

The flagship product is EVI® VI-500.002, a 20 g cyanoacrylate (CA) instant adhesive with a precision needle tip. It is engineered for sign-making, PVC window and door fabrication, and stretch-ceiling installation.

The range will expand with neutral PVC profile bonders, harpoon-system adhesives, and structural assembly products. Distribution runs through the same EVI DIGITAL regional network.

What can EVI VI-500.002 cyanoacrylate adhesive be used for?

EVI® VI-500.002 is a professional cyanoacrylate instant adhesive in a 20 g precision-tip bottle. Recommended applications:

Sign-making & POS — 3D lettering, channel-letter returns, lightbox edges, POP/POS displays.
PVC windows & doors — gasket spot-fixing, sash-stop and bumper assembly, escutcheon and rosette bonding.
Stretch ceilings — corner and joint reinforcement, decorative profile fixing, harpoon-end spot-bonding.

Bonds rigid PVC, ABS, acrylic, polystyrene, wood, rubber and most metals in seconds.

— For distributors

Building the EVIBOND network.

Open to partners across Central and Eastern European markets. Exclusive territories, free testing samples, volume pricing and technical support from EVI DIGITAL.

Free samples for testing on your own equipment
Transparent pricing that scales with volume
Marketing materials, technical sheets, customer giveaways
Regular shipments with confirmed lead times

Request terms

— Contact

Let's talk about your project.

Tell us who you are and what you're planning — we'll match thickness, format and the right regional partner. Samples for testing on your printer on request. We reply within one business day.